How To Prepare For A Building Inspection

You need to prepare adequately for building inspections that can help prevent future problems and also to avoid any surprise. What you need to avoid in your property is breakage of fixtures or causing damage. Thus, whether you are planning to buy or sell a property, it is vital to follow these steps to prepare for building inspection or visit website of top rated inspectors directly.

Understand the Process

First, you need to understand the purpose of building inspection. In most cases, the inspector wants to see what you have completed and provide recommendations for changes. Inspections vary from one region to another. Ensure you have information about the needed inspections from the relevant building organization.

Clean the Building

Although this seems simple, most homeowners ignore this task. Any building inspector will pay attention to the cleanliness of the property. When you clean your building, they will have an idea of how the building is maintained, and there are chances that they will do a good job. As you know, clean facilities give the impression that they are cared for.

Be Punctual

In most cases, building inspectors arrive at your property early. Thus, if you have scheduled inspection at 9:00 a.m., you should get your building ready at least one hour before. Most building inspectors start with exterior parts. Therefore, you should leave the shades down and drapes drawn.

Leave Utilities Connected

Building inspectors might need to turn on the stove, run the dishwasher, or test the HVAC system. Therefore, ensure all these appliances are on, especially when the property is vacant. For instance, inspectors cannot examine receptacles for grounding and reverse polarity when the power is off. If there is no electricity, the inspector may be forced to postpone the inspection process, and this can cost you money.

Provide Adequate Workspace

Remove bookcases, boxes, and furniture that block your access to the water heater, furnace, and air conditioner. An inspector will require a few meters of working space to check whether the systems are in place. Usually, the inspector may not move anything, and it is necessary to have adequate access.

Create Access to Attic and Garage

Your building inspector may need to get into the basement and attic as well. Therefore, you need to ensure the path is clear. Always check signs of water in the basement and remove all stored boxes and items away. All spider webs should be cleared. Also, look for rodent droppings in the attic and ensure all valuables are secured.

Provide Access to Outbuildings and Electrical Boxes

Ensure you have the remote control or key for opening your garage door. Unlock the covers for the water sprinkler system and electrical box. If there are exterior buildings ensure they are accessible during the inspection. Ensure each of them is labelled.

Clear Bushes

You do not expect the inspector to lift heavy objects around your property because they are blocking different areas to be inspected. Ensure you cut down all dead branches and remove trees that are adjacent to the foundation. In addition, remove all trash cans that are within the property.